Update README.md file

Signed-off-by: Iliya Iliev <iliyailiev3592@gmail.com>

dvb-tools/README.md

@@ -1,12 +1,13 @@
-# DVB - TOOLS
+## DVB - TOOLS
 
-## SetUp
+#### SetUp
 1. ./setup
 2. ./getVersion <ip_address_of_Pi_target_device>
 3. make
 4. ./deploy <ip_address_of_Pi_target_device>
 
-## Usage
+
+#### Usage
 All the dvb-applications are deployed on the Desktop of the pi device
 in the following maner:
 
@@ -34,8 +35,10 @@ $ cd /etc/init.d
 $ sudo ./tvheadend stop
 
 
-## Linux DVB API applications and utilities.
+#### Linux DVB API applications and utilities.
+
 **Libraries**
+
 libdvbapi - Interface library to digital TV devices.
 libdvbcfg - Library to parse/create digital TV channel configuration files.
 libdvbsec - Library for Satellite Equipment Control operations.
@@ -44,42 +47,44 @@ libdvben50221- Complete implementation of a CENELEC (European Committee for Elec
 libdvbmisc - Miscellaneous utilities used by the other libraries.
 
 **Utils**
+
 - Main User Applications:
-        **scan: the original frequency scanning tool used to generate channel lists**
-        **dvbscan: another frequency scanning tool used to generate channel lists .... some distro package managers have rebranded this as "scandvb" ... also note that "atscscan", if included, is simply a copy of dvbscan. The DVB or ATSC protocol is determined by a tuning file feed to these programs. Tuning files are kept in the scan/atsc, scan/dvb-[csth] directories. This program discovers carriers on candidate frequencies and also determines sub-channels. sub-channels may be the main program at a lower data rate or completely new content. With the output produced, a short name can be used to identify the frequency and the streams needed to get a channel.**
-        **czap, szap, tzap: tuning utilities for DVB-C, DVB-S, DVB-T. These change the channel/sub-channel as identified by the file output by scan above.
-        azap: tuning utility for ATSC.**
-        util/gnutv - Tune, watch and stream TV. I.e. a DVB UI.
-- General Utilities:
-        util/dvbdate - Read date time information from the currently tuned multiplex.
-        util/dvbnet - Control digital data network interfaces. DVB network interface manager (IP over DVB).
-        util/dvbtraffic - Monitor traffic on a digital device. PID analysis of currently tuned multiplex.
-        **util/femon - Frontend (fe) monitor. Monitor the tuning status on a digital TV device.**
-        util/zap - *Just* tunes a digital device - really intended for developers. Note that this is a seperate app then those *zap utilities listed above.
-        util/atsc_epg - Recent versions of dvb-apps include a program to print out the next three hours worth of programs on a given frequency (for ATSC only).
-- Hardware Specific Utilities:
-        util/av7110_loadkeys - A utiltity to load IR remote keymaps into an av7110 based card using the /proc/av7110_ir interface
-        util/dib3000-watch - Monitor DIB3000 demodulators
-        util/dst-utils/dst-test - Utilities for DST based cards.
-        util/ttusb_dec_reset - Reset a TechnoTrends TTUSB DEC device.
-
-
-**test**
-    diseqc: Sends various diseqc sequences on a SAT frontend.
-    set22k: Legacy tone switching for SAT frontends.
-    setvoltage: Legacy voltage switching for SAT frontends.
-    setpid: Set video and audio PIDs in the demux (only for hardware MPEG decoder)
-    video: tiny video watching application
-    **test_sections: Hex dump of section data from stream.**
-    test_sec_ne: Like test_sections, but also test Not-Equal filter mode.
-    **test_pes: Hex dump of PES data from stream.**
-    test_tt: Demonstrate teletext decoding from PES data.
-    test_av: Test audio and video MPEG decoder API.
-    test_vevent: Test VIDEO_GET_EVENT and poll() for video events
-    test_stc: Test DMX_GET_STC.
-    test_stillimage: Display single iframes as stillimages
-    test_dvr: Record a partial transport stream of selected PIDs to a file or a full stream if supported by the hardware
-
-## Aditional information
+**scan: the original frequency scanning tool used to generate channel lists**
+**dvbscan: another frequency scanning tool used to generate channel lists .... some distro package managers have rebranded this as "scandvb" ... also note that "atscscan", if included, is simply a copy of dvbscan. The DVB or ATSC protocol is determined by a tuning file feed to these programs. Tuning files are kept in the scan/atsc, scan/dvb-[csth] directories. This program discovers carriers on candidate frequencies and also determines sub-channels. sub-channels may be the main program at a lower data rate or completely new content. With the output produced, a short name can be used to identify the frequency and the streams needed to get a channel.**
+**czap, szap, tzap: tuning utilities for DVB-C, DVB-S, DVB-T. These change the channel/sub-channel as identified by the file output by scan above.
+azap: tuning utility for ATSC.**
+util/gnutv - Tune, watch and stream TV. I.e. a DVB UI.
+
+General Utilities:
+util/dvbdate - Read date time information from the currently tuned multiplex.
+util/dvbnet - Control digital data network interfaces. DVB network interface manager (IP over DVB).
+util/dvbtraffic - Monitor traffic on a digital device. PID analysis of currently tuned multiplex.
+**util/femon - Frontend (fe) monitor. Monitor the tuning status on a digital TV device.**
+util/zap - Just tunes a digital device - really intended for developers. Note that this is a seperate app then those zap utilities listed above.
+util/atsc_epg - Recent versions of dvb-apps include a program to print out the next three hours worth of programs on a given frequency (for ATSC only).
+
+Hardware Specific Utilities:
+util/av7110_loadkeys - A utiltity to load IR remote keymaps into an av7110 based card using the /proc/av7110_ir interface
+util/dib3000-watch - Monitor DIB3000 demodulators
+util/dst-utils/dst-test - Utilities for DST based cards.
+util/ttusb_dec_reset - Reset a TechnoTrends TTUSB DEC device.
+
+**Test**
+diseqc: Sends various diseqc sequences on a SAT frontend.
+set22k: Legacy tone switching for SAT frontends.
+setvoltage: Legacy voltage switching for SAT frontends.
+setpid: Set video and audio PIDs in the demux (only for hardware MPEG decoder)
+video: tiny video watching application
+**test_sections: Hex dump of section data from stream.**
+test_sec_ne: Like test_sections, but also test Not-Equal filter mode.
+**test_pes: Hex dump of PES data from stream.**
+test_tt: Demonstrate teletext decoding from PES data.
+test_av: Test audio and video MPEG decoder API.
+test_vevent: Test VIDEO_GET_EVENT and poll() for video events
+test_stc: Test DMX_GET_STC.
+test_stillimage: Display single iframes as stillimages
+test_dvr: Record a partial transport stream of selected PIDs to a file or a full stream if supported by the hardware
+
+#### Aditional information
 https://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device
 https://www.linuxtv.org/wiki/index.php/LinuxTV_dvb-apps