| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- Various small test/sample programs for the Linux DVB API Version 2/3
- The default devices used by the test programs are generally
- /dev/dvb/adapter0/*0, and can be overridden using environment
- variables:
- FRONTEND=/dev/dvb/adapter0/frontend0
- DEMUX=/dev/dvb/adapter0/demux0
- DVR=/dev/dvb/adapter0/dvr0
- AUDIO=/dev/dvb/adapter0/audio0
- VIDEO=/dev/dvb/adapter0/video0
- NET=/dev/dvb/adapter0/net0
- diseqc : Send various diseqc sequences on a SAT frontend.
- Best used with a diseqc test box with some LEDs to
- show the result of the commands.
- set22k : Legacy tone switching for SAT frontends.
- setvoltage : Legacy voltage switching for SAT frontends.
- setpid : Set video and audio PIDs in the demux; useful only
- if you have a hardware MPEG decoder.
- video : A tiny video watching application, just starts capturing /dev/video
- into /dev/fb0.
- WARNING: May crash your box or mess up your console!
- test_sections : Hex dump of section data from stream.
- test_sec_ne : Like test_sections, but also test Not-Equal filter mode.
- test_pes : Hex dump of PES data from stream.
- test_tt : Demonstrate teletext decoding from PES data.
- test_av : Test audio and video MPEG decoder API.
- test_vevent : Test VIDEO_GET_EVENT and poll() for video events
- test_stc : Test DMX_GET_STC.
- test_stillimage : Display single iframes as stillimages
- iframes can be created with the 'convert' tool from
- imagemagick and mpeg2encode from ftp.mpeg.org, and must
- have a supported size, e.g. 702x576
- ($ convert -sample 702x576\! test.jpg test.mpg)
- test_av_play : Test playing MPEG PES (VDR format) from a file
- test_dvr_play : Test playing MPEG TS from a file (don't try, driver is broken)
- test :
- test_audio :
- test_dmx :
- test_dvr :
- test_front :
- test_switch :
- test_video : Play video-only file on /dev/dvb/adapter0/video0
|
